Numerical control part of numerical control bus processing machine

Conventional bending steps:

1. Start 2 parameter setting 3 Storage call 4 Set the thickness of the plate and the required workpiece angle 5 Return to the main interface 6 Operation control (The bending operation is turned on by default, the manual state is used, please switch to the automatic state.) .
Note: The conventional bending is effective for angular positioning, and the equipment bending data is only ideal data. Due to various reasons such as rebound of the copper bar, the playing angle may not be accurate, and it can be modified according to the angle of the first true bending (bending angle) The modification is to modify the elastic compensation in the storage call. For example, if you set the 90 degree fold, it is 92 degrees to -2 degrees, and the fold is 88 degrees + 2 degrees.)

2, vertical bending, embossing operation steps; 1 start 2 operation control (pointing to the desired position to record the current display position of the number 3 return to the main interface 4 parameter settings 5 ​​storage call 6 record the number stored to the set displacement distance 7 Return to the main interface 8 operation control (the bending operation is turned into the manual state by default, please switch to the automatic state when using it.) Click the pedal operation.
Note: Please switch to the vertical positioning and embossing to be effective for displacement positioning. Only the displacement positioning is valid (the set displacement distance is valid). 3: The fixed parameter password is: 332211. Only the top mold radius can be modified in the fixed parameters, (R5, R10), R5 is used for bending of copper bars below 8mm, R10 is used for bending of copper bars of 8mm or more, please do not use other parameters. modify.